rus
Даллас (Техас)
11:27
Installation of cold gas-dynamic spraying
Installation of cold gas-dynamic spraying - фото 1 Installation of cold gas-dynamic spraying - фото 2 Installation of cold gas-dynamic spraying - фото 3 Installation of cold gas-dynamic spraying - фото 4 Installation of cold gas-dynamic spraying - фото 5 Installation of cold gas-dynamic spraying - фото 6
Обновлено: 20 февраля 2020, 00:44

Installation of cold gas-dynamic spraying

Цена по запросу
Юрчук Иван Владимирович
руководитель технического отдела
на Флагма с 23 марта 2019

Описание

The technology of cold gas-dynamic spraying is intended for applying powder coatings of metals (Al, Zn, Cu, Fe, Ti, Ni, Co, etc.), alloys (bronze, brass, stainless steel, etc.), powder mixtures, including with non-metals, polymers, etc. on metal and dielectric products, including ceramics and glass, as well as compaction of new materials. Coating is carried out by a high-speed stream of “cold” powder particles, accelerated by a supersonic gas stream at a temperature substantially lower than the melting temperature of the particle material.
Advantages:
• for work only compressed air and electricity of 3.5 kW are needed;
• there is no heating and oxidation of the metal of the particles and the substrate, deformations, changes in the structure of metals (substrate temperature is less than 100-150 degrees C);
• there are no harmful and aggressive gases, substances, radiation and other dangerous factors;
• technological simplicity of coating.
Options:
Name Model 101 PROFI
Types of sprayed metals aluminum,
copper
zinc
Power Consumption 220 V 3.5 kW
Consumed air pressure 0.5-0.8 MPa
(5-8 atm)
Compressed air consumption From 0.4 m3 / min
Productivity by weight of the applied coating based on aluminum 1-6 g / min
(0.3-3 cm3 / min)
Number of temperature modes
Number of powder feeders 1
Dimensions:
Spraying unit 400 * 60 mm.
The device with a powder feeder 300x300x160 mm.
Weight
1.3 kg spray unit.
The device with a powder feeder of 9 kg.

Номер объявления: 1622   |  просмотров: 27  

Похожие объявления

2
Colloid mill - peanut butter machine
3 700 €/шт EXW
Normit Food, S.R.O., SK +29 объявлений
Is an ideal solution for continuous grinding of particles in suspensions like viscous, semi-hard and hard products, without preliminary grinding....
Цена по запросу
Спарк, ЧП, UA, 363 км +15 объявлений
Diesel D2, D6, EN590, Aviation Kerosene JP54, Fuel Oil M-100, Gasoline, LPG Gas, Oil - Export Deliveries - by tanker standards. Basis of delivery...
Цена по запросу
ЭК Факт, ООО, RU, 363 км +32 объявления
Water-filled road blocks made of high quality polyethylene: Designed to create mobile road barriers. For greater stability, the barrier can be...
Показать еще
Свяжитесь с компанией
Юрчук Иван Владимирович
руководитель технического отдела
По телефонам
В мессенджерах
Скажите, что нашли объявление на Флагма
Правила безопасности: Не соглашайтесь на предоплату, если не уверены в надежности компании.
Написать сообщение
Выбрать раздел
×
Вход в личный кабинет